At times you might have noticed your computer goes to sleep even when set not to windows 10. There might be a problem with hibernation mode, the screensaver settings, or any other unknown problems. This issue is often noticed among the users, but there are various ways to fix it. But what can you do when your PC sleeps automatically? It is a complex problem to diagnose with so many factors coming into play.

It is possible to fix the problem when Windows 10 goes to sleep when set to never. The easiest way to fix this is to boot your system and change the settings in the control panel. There are a few steps to it. Read through the article to learn how and which method might work for you.

See also How to fix We Couldn’t Install Some Updates Because The PC Was Turned Off

Methods To Fix When Your Computer Is Going To Sleep Even When Set To Never

Here are a few methods by which you can fix when computer goes to sleep even when it is set not to in Windows 10.

Reboot And Change Settings

Follow the steps below to reboot your system:

  1. Shut it down and remove the power cable.
  2. Reconnect to Power and switch it on.
  3. Once the computer boots, go to the control panel.control panel
  4. Click on Hardware and Sound and opt for Power options.Hardware and sound
  5. When you see the Choose or customize a power plan option, you will see ‘change when the computer sleeps‘.power options
  6. Click on it and change the settings to never.

Finally, restart your computer after following these steps.

See also: [FIXED] Mousocoreworker.exe Preventing Sleep On Windows

The Hibernation Mode

The hibernation mode on your system might be turned on, which causes you to find that your computer goes to sleep despite power settings. To fix this, follow a few quick steps mentioned below:

  1. Select the Start menu and then the Command Prompt.command prompt
  2. Now right-click on the Command Prompt, then choose Run as Administrator.
  3. When you see the black screen, type powercfg.exe /hibernate off and press enter.turn off hibernation mode
  4. You can now exit. Your hibernation mode is turned off.

See Also:

Re-Enable The Battery Driver

To re-enable the battery driver, follow the steps listed below:

  1. Select the Start menu and then the control panel.control panel
  2. Once opened, click on Hardware and Sound.Hardware and sound
  3. In there, you will see the device manager under Devices and Printers.device and printers
  4. Open Device Manager.batteries
  5. Now that the device manager is open, double-click on batteries.disable device
  6. When you see two options, right-click on Microsoft ACPI-Compliant Control Method Battery. Disable it and enable it back.

Rollback Display Adapters

If your hibernation mode is on, the display and sleep time are set to never, the battery driver is enabled, and your windows 10 is ignoring power settings, then try following the below-mentioned steps to rollback display adapters.

  1. Search for the Control Panel and open Hardware and Sound on the search menu.Hardware and sound
  2. Then click on device manager under Device and Printers.device and printers
  3. Now under Device Manager, double click and expand the Display Adapter.
  4. Right-click on the available option and opt for Properties.properties
  5. Among the available tabs, click on the Driver tab.
  6. If the Rollback option is available, click on it and press ok.

Enable Unattended Sleep Timeout

Unattended sleep timeout is a hidden feature. The settings here might cause the system to sleep irrespective of the timings. If none of the above steps worked out for you and you still find that your laptop goes to sleep even when set not to, then try enabling unattended sleep timeout with the below-mentioned steps:

  1. Click on the Windows key and R to open the Run program.
  2. Then type in regedit to open Registry Editor.run dialog
  3. Once it is opened, type the following text: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\238C9FA8-0AAD-41ED-83F4-97BE242C8F20\7bc4a2f9-d8fc-4469-b07b-33eb785aaca0
  4. There you will see the option of Attributes.
  5. Double click on it and change the value to 2 and click ok.
  6. Now go back and open the Power options under the Control Panel.power options
  7. In there, click on change plan settings.
  8. Further click on Change Advanced power settings and scroll down to find sleep.advanced settings
  9. Expand the sleep option and check unattended sleep timeout.
  10. Change it to the desired settings and click ok.

See Also: How To Adjust HDMI Screen Size On TV From Windows 10?

Quick Fixes

If you are unsure of the cause of why windows 10 goes to sleep on its own and don’t know where to start, you can use some quick and easy methods mentioned below. You can use these either before the steps mentioned above next time you see your computer goes to sleep even when set not to windows 10, or after you have tried everything out and haven’t found an answer:

Troubleshooting

Troubleshooting any program detects and lets you know the problems and updates. So troubleshooting when facing an issue helps you fix it quickly. Below are very few steps you will have to follow to troubleshoot:

  1. Open start and search for Settings.
  2. Select Update and Security, and then click on Troubleshoot.update and security
  3. Now scroll through and look for the program you want to fix.
  4. Then click on the run. It will look for problems and proceed.

Updating The System

Constantly updating the system helps it run smoothly without glitches. If you lag behind any updates, this method is for you to follow to fix multiple issues. Hopefully, including when your computer goes to sleep even when set not to windows 10. Follow the four steps below to check for updates:

  1. Open start and look for settings.
  2. Then click on Updates and Security.update and security
  3. You will see the option of windows update.
  4. Click on it and check for Updates.

Check out: How To Fix Windows 10 Startup Menu Missing? (validedge.com)

Screen Saver

Under the screen saver settings, if your screen saver is set to blank, the system might appear in sleep mode after a certain period of inactivity. It might seem like the computer goes to sleep even when set not to windows 10. Follow the below-mentioned steps to disable it and set it to none:

  1. Open start and go to Settings.
  2. Under Personalization, click on the lock screen.screensaver
  3. You will see the screen saver option as you scroll down.
  4. Click on it and change the screensaver to none and time to your desire.
  5. Once set, click OK.

See Also: How To Fix Windows 10 Startup Menu Missing?

FAQs

How to keep the computer awake in settings?

Apart from constant activity, you can change the settings to keep your system awake when not using it. Check out these steps for a fix. Click on start and search settings. Then under personalization click on the lock screen. Look for the screen saver and open it. You will see a box beside text on resume, display logon screen. Uncheck the box.

What is the use of a power plan?

This setting is built in to check how your system consumes power. It consists of hardwares and systems and lets you maximise the performance, reduce the power consumption or just balance it. Opting for higher performance definitely consumes more energy but fixes problems like audio crack or negative performance.

How to fix my system when it freezes in sleep mode?

If there is a toggle switch try turning it off and then on. The system might wake up. If that doesn’t work, Hold down your power button for several seconds. It should work.

Conclusion

This article tries to cover as many steps as possible to fix the computer going to sleep even when set not to windows 10. Hopefully, this article provided a satisfactory solution with the top 5 methods and some quick fixes for urgencies. But sometimes, none of them can turn out to be an answer. You can write to the Microsoft community and look for an answer during those times. 

See Also: Thread Stuck In Device Driver(Windows 10)-4 Ways To Fix