The Client does not hold a Required Privilege is a prevalent issue. But don’t worry, as we have 4 Ways to Fix A Required Privilege that is Not Held by the Client. After following one of these ways, you can overcome this problem.
If you have been a Windows user for long enough, you might be well-versed in this trouble. The operating system raises an issue concerning user privileges and file paths due to the fact that all files do not have the same privilege levels. This error message is called 0x800700522 and is a safety measure to prevent users from tampering with sensitive files and folders of the system.
Though it is there to improve the system’s robustness, it sometimes causes undesired inconveniences. Especially when you attempt to do some system-level file modifications for the software you are installing; therefore, we will attempt to add the Required Privilege Is Not Held by the Client error to the list of those Windows functions that were trying to be helpful but always got disabled by the end-users. Let’s get on with it, shall we?
Table of Contents
- 1 How To Fix A Required Privilege Is Not Held By The Client
- 2 Other solutions to fix the error
- 3 FAQs
- 4 Conclusion
How To Fix A Required Privilege Is Not Held By The Client
Method 1: Take ownership of the Root Drive
Usually, you store a file on your hard disk drive that does not have sufficient user privileges to process the Windows program manager or any other installed programs. So, to provide security privileges to the respective drive. Fix this; the client does not hold a required privilege; follow these simple steps:
5. It will ask for confirmation. Simply click OK. Finally, Click Apply, followed by OK.
This method should allow you to modify the contents of a file without getting a Required Privilege Is Not Held by the Client error. Reboot it after doing the steps mentioned above for good measure. If it did not work well, move on to the following method.
Method 2: Change Account Type To Admin
Your user account might not have enough security privileges for system file modifications and auditing. So, if you are running a standard user account, change its type to an administrator account.
Usually, the standard user accounts don’t have proper privileges to change critical system settings and processes among the existing system files. Conversely, an administrator account can access every system setting, file, and other features. You must do the fooling things to change your account type to admin.
1. At First, press the Windows + S keys together to enter the search or query mode.
2. Type User accounts in the Search Box and wait for the search results to populate. Click the Change your account type link under the user accounts window.
3. Click on the Administrator option from the list of the available options, then click on the Change account type button.
It will change your default or standard account into an administrator account. So now, hopefully, all the files and folders throwing you the Client error do not hold the Required Privilege and should shut themselves up. If they still feel like chatting, move on to the following method and see if that silences them.
Method 3: Allow Registry Modifications
It is possible that the operating system on your PC does not adequately allow permissions to access/ modify all the Registry entries. Change security permissions through Registry Editor.
1. At First, press Windows Key + R again to open the Run box. Type “regedit” in the search box to open the registry editor of your system.
2. Then open the regedit.exe option from all those populated Search Results. Expand the Computer from the left-hand side hierarchical options.
3. Then Right-click on the HKEY_CLASSES_ROOT Registry header and select Permissions.
4. A new dialog box opens up. In it, provide read, special permissions as well as complete control. Click on the Apply option and then click OK.
5. Provide all the required permissions to the following Registries using the same method mentioned above:
HKEY_CURRENT_USER, HKEY_LOCAL_MACHINE, HKEY_USERS as well as HKEY_CURRENT_CONFIG
6. Once you have done all this, go ahead and close the Registry Editor.
Now, reboot your system and try doing what you did when you got the Required Privilege Is Not Held by the Client error message. Allowing access to the above registries would have often fixed the problems. But, in the rare case this method did not work, keep scrolling, mate!
Method 4: Disable User Account Control
As you might have already guessed, this User Account Control is a security feature that allows users to perform administrative tasks without switching user accounts to one with complete administrative control. It has a lot of upsides, to it, but there is a possibility that it may result in getting a Required Privilege Is Not Held by the Client error message. In that case, it would be beneficial to disable the related notifications temporarily and check if the problem persists.
1. Press the Windows + S keys to enter the query or Windows search menu. Type Change user account control settings in that Search Box and wait for some results to populate.
3. Then open the same result on the Search Results page.
4. Drag the slider to the bottom and keep it at Never notify. It will disable all the notifications you typically get when you attempt to change the system files and folders.
5. Then Click OK to close the user accounts control window.
Other solutions to fix the error
If the above fixes fail to fix the issue for you. Then you can go for these additional fixes.
Using Command Prompt
With the assistance of Command Prompt, it would be simple to copy a specific file into the root of C:
- Select Command Prompt by pressing Windows Key + X. (Admin).
- Next, enter the command shown below into cmd: troubleshooter.txt from E: to C:
- After performing the above command, your files will be immediately copied to the required location, the root of the C: drive. This fix will resolve the “The Client does not hold a Required Privilege” error while creating a new file.
Customize the Sharing Permission options
Try changing the sharing permissions if you still cannot create a file using the command prompt method.
- Select Properties by right-clicking on your Windows C:/ drive.
- Click the Advanced Sharing icon under the Sharing menu.
- Next, ensure “Share this folder” is checked. Once done, click on Permissions. Check the box next to “Full Control” under Permissions for Everyone and ensure it is selected under Group or User names.
- Click Apply and then OK. Repeat this process until all open windows are shut. OpenTask Manager and end task for Windows Explorer.
- Now, restart the application again.
What is the required privilege for the client issue in Windows 10?
This error will appear when attempting to copy or create a file inside a directory without the necessary permissions or privileges. In other words, the issue happens when you attempt to copy, paste, or edit something inside a Windows folder. Microsoft forbids unauthorized access to the Windows installation.
How to enable privilege settings in Windows 10?
Begin by clicking Start, and select the Control Panel option. Type ‘User Accounts’ into the Control Panel's search bar, then click the User Accounts applet. Go to the User Account Window. Select the Turn User Account Control enable and disable option. The operating system will present a dialog box requesting your consent to proceed.
What do you mean by error code 0x80070522?
The hexadecimal number 0x80070522 means ‘The client does not hold a needed privilege.’ Generally, it indicates that Windows Update is not authorized to install, download, or apply updates to certain system components or directories. This code alerts the user that they are attempting to access crucial operating system files, which should not be changed or moved.
How to resolve the error code 0x80070522?
The error code can be solved by Modifying local privilege policies. Modify the C: drive's permissions. Customize the registry. Turn off user account control.
How to enable administrator privileges for Windows 10?
Select the Start option followed by Settings and then click on Account. Choose Change account type after selecting the account owner's name under Family & other users. Select Administrator options under Account type, and then click the OK button. Log in using the new administrator account.
That’s about it. After the above changes, restart your system for those changes to take effect. Now that you have given administrator control in the earlier method already. You no longer have to worry about fixing Required Privilege Is Not Held by the Client.
Don’t use this method to silence your system trying to warn you about something that you are doing which might affect its regular operation. But it is pretty pointless to mention this as the last line of this 1200-word article because you would do it anyway. It’s windows! It is always relatively easy to fix its problems anyway. Good luck.
Gravit Sinha: Founder of ValidEdge, a problem-solving website, driven by his lifelong passion for fixing issues.