Fix: The Computer Restarted Unexpectedly Loop Windows 10


Facing the most frustrating issue that the computer restarted unexpectedly loop on windows 10? Even when you try to install a newer Windows version, the windows installation cannot proceed. But it’s a pretty common issue for most of them using windows.restarted computer

Sometimes you can get rid of the error by clicking OK, but sometimes it won’t. Its keeps on repeating and restarting unexpectedly. But there are quick fixes for this problem.

See Also: How To Fix “This Device Doesn’t Support Miracast” On Windows 10

6 Methods to Solve The Computer Restarted Unexpectedly Loop on Windows 10

Always remember, you are not alone in this problem; this error is prevalent among users. Many may overcome, and many may not. So, here are six methods to solve the computer restarted unexpectedly loop on windows 10. Make sure that you follow each technique carefully.

See Also: Computer Not Recognizing Headphones [FIXED

Method #0 Use Advanced System Repair Pro (Strongly Recommended)

Our tool will quickly repair common computer errors, protect you from file or data loss, malware, trojans, hardware failure and optimize your PC to boost for maximum performance. Fix PC issues now using 3 easy steps:
  • Download this PC Repair Tool rated as "Excellent" on
  • Click on Start Scan button to find errors related to Windows.
  • Click Repair All to fix all issues with Patented Technologies.

Method 1: Disconnect All Your USB Drivers

If you connect so many different USB Drivers in the System and then disconnect all of them helps to overcome the computer restarted unexpectedly loop on windows 10.disconnect all your usb drivers

Sometimes, your USB drivers are not compatible with your operating system, and an error appears. Moreover, it will end up in the computer restarted unexpectedly. Therefore, when you experience this error, you should disconnect all of your USB Drivers, such as pen drives, mouse, keyboards, Printers ’ USBs.

After doing this, try to install windows 10 on your PC.

See Also: {Solved} 13 Ways To Fix USB Ports Not Working Error

Method 2: Check Your Hard Drive Cables

You can also experience the “the computer restarted unexpectedly loop on windows 10” when something is wrong with the hard drive cables. Thus, you should check the connected cables with motherboards or your hard drive wires are loosened. If the wires are not proper, fix that.hardware wires

However, there is one thing you need to keep in mind: once the case of your computer is opened, the warranty is void. Therefore, if your computer is still under warranty, you should take it to the official repair center.

After you make sure that there is a problem with your Hard drive cables or any necessary cables, make sure you fix them to prevent the issue.

See Also: [12 Ways] Fix Seagate External Hard Drive Not Showing Up

Method 3: Use Windows 10 Recovery Drive

After doing the above two methods, if you are still facing the same problem, the computer restarted unexpectedly loop on windows 10. Let’s move on to the system’s technicalities and try to solve the problem technically. You can solve this problem by using windows 10 recovery drive to perform startup repair. Sometimes after you install windows the computer restarted unexpectedly.

Follow the instructions below

  1. Insert the USB with at least 8GB of space available to the computer
  2. Type recovery drive in the search bar, open the windows 10 Recovery Drive feature and click NEXTrecovery drive
  3. Select the USB drive and click next
  4. Click Create to create a recovery drive

Run Startup Repair

  1. Plug your recovery drive to your computer, and then boot your PC using the recovery drive 
  2. Click on Repair the computer and then navigate to Troubleshoot>Advanced options.
  3. On the advanced options screen, click on the automatic repair or startup repair.start up repair
  4. Wait for the process to complete and restart your system and after doing, check whether the computer restarted unexpectedly loop on windows 10.

See Also: 4 Ways To Fix Automatic Repair Couldn’t Repair Your PC

Method 4: Edit the Registry Editor

In most cases, the root of the problem is “the computer restarted unexpectedly loop on windows 10” is the corrupted setup.exe entry value data in Registry Editor. In addition, you can edit the Registry Editor to correct it.

If you are facing the issue, follow the instructions below.

  1. Boot your system using the recovery drive and enter the Advanced options screen to choose Command prompt.
  2. Secondly, Type regedit in the window and then press enter to open the Registry editor.regedit
  3.  Go to the path: Computer/HKEY_LOCAL_MACHINE/SYSTEM/Setup/Status/ChildCompletion.
  4. Double click the setup.exe file in the right panel and change the value data to 3 and also click Ok to confirm the changes.value 3
  5. Close the Registry tab and command prompt, then click ok on the error message to restart your computer.

After restarting your computer, the error might have to get solved.

Method 5: Reset Your BIOS Settings and Format the Installation Partition

And the following method is resetting your BIOS. This method certainly works if none of the above worked for you. 

To see how to do that, read your motherboard manual for some detailed instructions.

After you’ve made all the respective changes in BIOS, you need to format your partition by using the tool called diskpartl. To do that, follow the respective steps:

  1. Boot from your respective USB flash drive, and if you see The computer restarted unexpectedly error message, press Shift + F10 to open Command Prompt.cmd
  2. Once Command Prompt opens, type diskpart, and press Enter.diskpart
  3. Enter list volume and press Enter. You should see a list of many partitions available. Find the partition on which you desire to install Windows 10 and make a note of its Volume number.
  4. Enter select volume 1. Here volume 1 is used as an example, but you need to use the volume that matches respectively with your partition.
  5. Enter format fs=ntfs quick label=test and press Enter. You can replace the test with any other name you want to use for your partition. nfs

Note: By executing this command, you’ll remove all files and folders from the selected partition.

See Also: How To Reinstall Windows 10 Without Losing Data

Method 6: Change Your BIOS Settings

Your BIOS is responsible for many processes taken over, and if your BIOS is not configured correctly. You might not be able to Restart your PC.

Sometimes your computer restarted loops unexpectedly on windows 10 due to BIOS Settings.

To do that, follow these steps:

  1. Enter your BIOS while the PC boots.
  2. Once you enter BIOS, go to Advanced Tab > Onboard Device Configuration.
  3. Set the SATA Mode to AHCI.sata mode
  4. Now navigate to the Boot tab and set Secure Boot to Enable. Also, change Load Legacy OPROM and make it disabled.legacy
  5. Set Boot Mode to UEFI and save the respective changes.
  6. While your PC boots, press F12 to open the boot menu tab. Now select your UEFI boot device. 

Moreover, also Keep in mind that you might not have all these settings available in BIOS, and if that’s the case, try to enable the available settings.

See Also: 3 Ways To Fix No Boot Device Found Error {2022 Updated}


Why does my PC gets restarted many times?

Your computer may be get restarted often because of something wrong with your hardware or your operating system.

How to open safe mode in Windows ?

To open safe mode in Windows 10, Press and hold the Shift key and click Start > Power > Restart. Click Troubleshoot > Advanced options > Startup Settings > Restart Press F4, F5, or F6 keys to boot into Safe Mode in Windows 10.

How do I install windows 10 on my Computer?

There are two different ways to install Windows 10 on your computer. One is purchasing the original windows 10 Operating System and the other is creating windows 10 installation media on a running computer.


In conclusion, Here are 6 different methods to fix the error the computer restarted unexpectedly loop on windows 10. You can try any of the above and fix the mistakes by yourself, and use the PC without any hindrances.

In addition, it is always mandatory to back up your Personal Computer with your Pen drive or any other drive. That will be easy for you when you want to restore your computer when it crashes.