0xa00f4244 Camera Error Code | 5 Easy Fixes [2021]

0
935

The camera app in the Windows 10 Operating system is the default webcam software prone to various general camera errors. Error 0xa00f4244 is one of the most common camera-related errors on the camera app in windows 10. 0xa00f4244 no camera attached usually occurs when the application is unable to detect your camera properly.

The error is indicated by the displaying of the following message, which goes as “ We can’t find your camera or ‘0xa00f4244 nocamerasareattached’. Check to make sure it is connected and installed properly, that it is not blocked by anti-malware, and that your camera drivers are up to date.”

Causes Of The 0xa00f4244 Error

This error could occur due to the following reasons:

  • The system may fail to detect your camera if the camera application is not properly installed.
  • If you have antivirus software that is blocking your camera.
  • Your camera’s driver is not up to date.
  • If your webcam has not been enabled.
  • Due to alternate camera settings.
  • Or it could be due to different encoding standards and viruses in your system.

And as the saying goes, “to every problem, there is always a solution,” well, in this case, rather than a single solution, we present to you multiple of them, along with a superadded fail-safe.

See also: [Solved] How to Stop Skype from Starting Automatically

Fixes For 0xa00f4244 Error

These are 4 of the most effective methods to fix 0xa00f4244 error:

Method #0 Use Advanced System Repair Pro (Strongly Recommended)

Our tool will quickly repair common computer errors, protect you from file or data loss, malware, trojans, hardware failure and optimize your PC to boost for maximum performance. Fix PC issues now using 3 easy steps:
  • Download this PC Repair Tool rated as "Excellent" on TrustPilot.com.
  • Click on Start Scan button to find errors related to Windows.
  • Click Repair All to fix all issues with Patented Technologies.

Make Adjustments To Your Registry

You can do this by:

  • Type regedit in the windows search bar
  • Right-click on Registry Editor
  • Run it as an administrator
  • Then click on File
  • Click on Export and back up the registry. We can easily restore it in case of mishaps, or you could also create a restore point.

Now do as follows:

In the case of a 32-bit system

  • HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsmediafoundationPlatform.

In the case of a 64-bit system

  • HKEY_LOCAL_MACHINESOFTWAREWOW6432NodeMicrosoftWindowsMediafoundationPlatform
  • Right-click on the right window, click New>DWORD(32-bit)Value.
adjust registry
Adjust registry
  • Name this value as EnableFrameServerMode
  • Right-click, then click Modify to modify this newly created registry value.
  • Now set its value to zero and save the changes.
  • Restarting your PC should resolve your issue.

This registry change fixes the error code 0xa00f4244 which is caused due to the difference in the encoding standard. Certain cameras won’t work in windows 10.

See also: 7 Ways To Fix Laptop Touchpad Not Working

Have A Look At Your Drivers

  • Click on the Start menu and navigate to Device Manager.
  • Then click on Imaging Devices and then expand to a submenu where you can see your camera.
Device manager
Device manager
  • Now right-click on the camera device and then click on Update driver.
update driver
Update driver
  • In case your driver is up to date, and the issue is still persistent, then its occurrence could be due to the latest driver update breaking your camera. Therefore, you will have to try and rollback the camera driver.
      • Right-click the Start menu, then press Device Manager.
      • Click on Imaging devices, expand the sub-menu where you can see your camera device.
      • Right-click on the camera device and click on Properties
      • In the Driver tab, navigate to the Roll Back Driver button.

And it should solve the 0xa00f4244 error.

See also: [FIXED] How to Fix Dell Laptop Plugged in Not Charging

Scan for malware

  • Go to the Notifications area
  • Click on Windows Defender
  • Then click on Virus & threat protection.
  • Select Scan Offline.
malware
Scan for Malware
  • Automatically your computer will restart, and the scanning procedure will begin
  • Once that has been completed, proceed to open the Windows Defender again.
  • Click on Virus & threat protection
  • Then open the Virus & threat protection settings
  • Now proceed to enable Cloud-based protection.
  • Now you can restart the computer and check your camera.

Trouble-shooter

  • Press on Windows key + I
  • This will open the Settings app
  • Then click on Update & security
  • On the left pane, press Troubleshoot
  • At the bottom and click on Store Apps.
  • Now navigate to the Run the troubleshooter button.
troubleshooter
Run the Troubleshooter
  • Once you have run the troubleshooter button, check if the error 0xa00f4244 is still there in the camera app.

In case if the above four methods refuse to show any result, there’s always the fail-safe method to solve the camera error code 0xa00f4244.

Third-Party Camera Apps

Switching to alternate camera apps that are present in abundance is always an option. These third-party camera apps are useful as they have their formatting softwares and sometimes even drivers, which is a huge plus if solution two does not work. It is always preferable to opt for the best of all, provided by the Original Equipment Manufacturers themselves.

See also: 6 Ways to Fix Failed to Create D3D Device

Method #Bonus Use Advanced System Repair Pro (Strongly Recommended)

Our tool will quickly repair common computer errors, protect you from file or data loss, malware, trojans, hardware failure and optimize your PC to boost for maximum performance. Fix PC issues now using 3 easy steps:
  • Download this PC Repair Tool rated as "Excellent" on TrustPilot.com.
  • Click on Start Scan button to find errors related to Windows.
  • Click Repair All to fix all issues with Patented Technologies.

Conclusion

Error 0xa00f4244 is a common error on the camera app in the Windows 10 Operating System. The above solutions can be performed by anyone and don’t require technical expertise. Well, we do hope now that your error has now been resolved.

See also: 3 Ways to Fix MMC Could Not Create the Snap-In

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.